Selling UWB Precise Location System Technology Source Code & Schematic/PCB Diagram

  • Indoor Anchor A1102P

    The UWB real-time location system is a TDOA location system using UWB wireless communication technology, with a location accuracy of about 30~50cm.

    Both Anchors, A1102P and A1106P, are ceiling-mounted and are usually used indoors. The power supply methods are all POE power supply.

    The anchor can be configured as a location anchor or clock source. When configured as a anchor, it is responsible for receiving the UWB location signal sent by the tag and the clock synchronization signal sent by the clock source; when configured as a clock source, it periodically sends the clock synchronization signal. The latest version of the firmware allows the anchor to function as a normal anchor and clock source at the same time.

    A1102P is a single network port anchor, connected to the POE switch through a network cable.

    Main features:

    1. As a UWB location anchor, receive UWB location signals sent by tags
    2. As a UWB clock source, regularly send clock synchronization signals to keep the clocks of anchors in the area consistent
    3. Use POE power supply, no need to provide additional power supply
    4. The IP address can be specified or automatically assigned through DHCP.
    5. Automatic discovery by location engine.
    6. Each anchor has an EUI64 ID that complies with the EUI specification.
    7. The clock synchronization signal sending interval is configurable
    8. The PAN ID can be configured to filter irrelevant UWB packets.
    9. The clock can be synchronized with up to 5 clock sources for location.
    10. The preamble length/PRF/PAC of UWB communication data packets can be configured.
    11. The anchor firmware can be upgraded.

    Read more …

  • Indoor Anchor A1106P

    The UWB real-time location system is a TDOA location system using UWB wireless communication technology, with a location accuracy of about 30~50cm.

    Both anchors, A1102P and A1106P, are ceiling-mounted and are usually used indoors. The power supply methods are all POE power supplies.

    The anchor can be configured as a location anchor or clock source. When configured as a anchor, it is responsible for receiving the UWB location signal sent by the tag and the clock synchronization signal sent by the clock source; when configured as a clock source, it periodically sends the clock synchronization signal. The latest version of the firmware allows the anchor to function as a normal location anchor and clock source at the same time.

    A1106P is a dual network port anchor with built-in network switch chip and POE power supply/power receiving chip. One network port is connected to the POE switch, and the other network port is connected to other lower-level anchors. Up to 6 anchors can be connected in series.

    Main features

    1. As a UWB location anchor, receive UWB location signals sent by tags
    2. As a UWB clock source, regularly send clock synchronization signals to keep the clocks of anchors in the area consistent
    3. Use POE power supply, no need to provide additional power supply
    4. A1106P provides another network port to supply power to other network devices and provide network access.
    5. The IP address can be specified or automatically assigned through DHCP.
    6. Automatic discovery by the location engine.
    7. Each anchor has an EUI64 ID that complies with the EUI specification.
    8. The clock synchronization signal sending interval is configurable
    9. The PAN ID can be configured to filter irrelevant UWB data packets
    10. The clock can be synchronized with up to 5 positioned clock sources
    11. The preamble length/PRF/PAC of UWB communication data packets can be configured, etc.
    12. anchor firmware can be upgraded

    Read more …

  • Name-Card Style Tag T1201C

    Our mass-produced location tags are name-card style and use DW1000 as the UWB transceiver. In the early stage, the DWM1000 module was used, and in the later stage, the self-designed UWB module was used. Some models also added LNA/PA to increase the location range.

    Use STM32F103RBT6 as the main control MCU. Our initial purchase price for this chip was about 12 yuan to 14 yuan, and later it rose to 180 yuan per piece. It was really crazy and made us very passive. However, it later fell back.

    The power supply uses an 800mah lithium battery as the power source, and uses a USB interface for charging, which also serves as the tag configuration interface.

    There is an MPU6050 three-dimensional accelerometer chip designed on the tag. During mass production, it was found that the effect was not very great, and this chip was not attached in the later production.

    There are 2 LEDs designed on the tag, one red and one green.

    There is a button designed on the tag, which can be used for alarm purposes. Specific uses require server-side design. The firmware design can support multiple buttons, and later OEM customers need to add other functions (such as anti-tampering, etc.).

    Read more …

Home

UWB Location Single Network Port Anchor A1102P BackBoard Circuit Diagram and PCB Diagram - Price: $150 USD

Written by: zhang
Category: Selling

UWB Location Single Network Port Anchor A1102P BackBoard Circuit Diagram and PCB Diagram - Price: $150 USD


The A1102P is our best-selling anchor product. The circuit structure is reasonable and the operation is stable.

Use STM32F103RET6 as the main control MCU, W5500 as the network interface, and TPS23753APW as the POE to receive power.

We will provide 4 versions of AD project files: Rev2.0, Rev2.1, Rev2.11, Rev2.2, of which Rev2.2 is the latest version. There are also DWM1000 adapter board project files.

Starting from Rev2.2, the conversion board between the anchor base plate and the UWB module has been changed from welding to pin header, so there are two types of conversion boards.

Please note that only AD project files are provided, and there is no STM32 firmware source code. If you need the firmware source code, please click here: UWB Location Anchor Firmware Source Code - Price: $7,500 USD

Please note that this sales item only includes the anchor chassis and does not include UWB module circuits and PCBs. If you use the original DWM1000 module, we can provide the adapter board PCB diagram.

If you want to produce UWB modules by yourself, we have 3 types of UWB modules for you to choose from.

UWB Module SDWM1000 Circuit Diagram and PCB - Price: $300 USD

UWB Module Anchor-RFM-PA-LNA-ANT Circuit Diagram and PCB - Price: $450 USD

UWB Module UM2000 Circuit Diagram and PCB - Price: $450 USD

 

 

UWB Antenna and UWB Module

Written by: zhang
Category: Product

UWB Antenna and UWB Module

At the beginning of the project, we used DWM1000 modules with built-in ceramic antennas. As the sales work progressed, we found that DWM1000 accounted for too high a proportion of the cost.

We first switched to using a module similar to DWM1000 generated by a third party, but found that the cost was still too high. In addition, we plan to make an outdoor version of the anchor. The antenna must be external, so we cannot use modules with built-in antennas such as DWM1000.

We decided to make our own UWB module.

Read more …

Bracelet Tag T1202W

Written by: zhang
Category: Product

Bracelet Tag T1202W

The circuit of the bracelet tag is roughly the same as that of the name-card style tag T1201C. The difference is that the bracelet tag does not have wireless charging or RFID. The main reason is lack of space.

Because our previous customers basically had no demand for bracelet tags, there was no mass production of bracelet tags.

There was once a customer who wanted a bracelet tag with heart rate detection, and we made a sample, but their project was not completed; another customer wanted to add a display/vibration, and we designed a specially designed one, but this customer later did not have it. continue.

For the standard version of the bracelet tag we designed, the main control MCU was changed to STM32F103TBU6 (QFN package), wireless charging was canceled, the alarm button was canceled, and the anti-tamper function was added. The lithium battery was changed to 600mah, and magnetic charging was used.

Read more …

Indoor Anchor A1106P (Dual Network Ports/POE Power Supply/Can be Cascaded)

Written by: zhang
Category: Product

Indoor Anchor A1106P

The UWB real-time location system is a TDOA location system using UWB wireless communication technology, with a location accuracy of about 30~50cm.

Both anchors, A1102P and A1106P, are ceiling-mounted and are usually used indoors. The power supply methods are all POE power supplies.

The anchor can be configured as a location anchor or clock source. When configured as a anchor, it is responsible for receiving the UWB location signal sent by the tag and the clock synchronization signal sent by the clock source; when configured as a clock source, it periodically sends the clock synchronization signal. The latest version of the firmware allows the anchor to function as a normal location anchor and clock source at the same time.

A1106P is a dual network port anchor with built-in network switch chip and POE power supply/power receiving chip. One network port is connected to the POE switch, and the other network port is connected to other lower-level anchors. Up to 6 anchors can be connected in series.

Main features

  1. As a UWB location anchor, receive UWB location signals sent by tags
  2. As a UWB clock source, regularly send clock synchronization signals to keep the clocks of anchors in the area consistent
  3. Use POE power supply, no need to provide additional power supply
  4. A1106P provides another network port to supply power to other network devices and provide network access.
  5. The IP address can be specified or automatically assigned through DHCP.
  6. Automatic discovery by the location engine.
  7. Each anchor has an EUI64 ID that complies with the EUI specification.
  8. The clock synchronization signal sending interval is configurable
  9. The PAN ID can be configured to filter irrelevant UWB data packets
  10. The clock can be synchronized with up to 5 positioned clock sources
  11. The preamble length/PRF/PAC of UWB communication data packets can be configured, etc.
  12. anchor firmware can be upgraded

Read more …

Page 4 of 10

Contact Information

Mobile: +86 18985041403

Twitter: @BD8NCF

EMail: [email protected]

MyBlog: https://bd8ncf.com

About Me

Copyright

The articles on this site are all original and the copyright belongs to Zhang Xiaolong.

Anyone can reprint, but the source and author information must be indicated.

Older Posts