This site was created just for you!
Due to operational reasons, we stopped UWB business. We don’t want the results of our previous work to be wasted, so we decided to transfer all the results we have on UWB.
The purpose of this site is to describe what we did before and what you get when you take over.
Click here to view "About UWB Ultra-Wideband Precision Location System". This article briefly introduces one of our UWB systems.
There are several ways to transfer technology:
1. Shared full set of technology transfer. We sell all the UWB technologies we own to you, and you only have the right to use them. You can sell UWB products produced by these technologies without restrictions, but you cannot resell these technologies to third parties. We always own the full rights to these technologies and we can sell them again to others.
2. Partial technology transfer. We have a number of technologies in the UWB field, and you may only be interested in some of them. You can only purchase the technologies you are interested in. You only have the right to use it, and you can sell UWB products produced by these technologies without restriction, but you cannot resell these technologies to third parties. We always own the full rights to these technologies and we can sell them again to others.
We ultimately decided to transfer the technology (code and circuit diagrams) on a non-exclusive basis. Here is the price list:
| No | Item name | comments | Price | Package Price |
| The following hardware does not contain firmware, only circuit schematics and PCB diagrams | ||||
| 1 | Anchor A1102 circuit schematic diagram and PCB diagram | Single network port/POE power supply | $150 | $1,500 |
| 2 | Anchor A1106 circuit schematic diagram and PCB diagram | Dual network ports/POE power supply/with network switch chip | $300 | |
| 3 | Outdoor Anchor A1108 circuit schematic diagram and PCB diagram | $300 | ||
| 4 | UWB module SDWM1000 circuit schematic diagram and PCB diagram | $300 | ||
| 5 | UWB module RFM-PA-LNA-ANT circuit diagram and PCB diagram | $450 | ||
| 6 | UWB module UM2000 circuit diagram and PCB diagram | $450 | ||
| 7 | NameCard Tag T1201C circuit diagram and PCB diagram | $150 | ||
| 8 | Bracelet Tag T1202W circuit diagram and PCB diagram | $150 | ||
| 9 | NameCard Tag T1205C circuit diagram and PCB diagram | with PA/LNA | $300 | |
| The following software provides source code and provides appropriate help so that you can compile normally | ||||
| 1 | RealTime Location Engine | $15,000 | $16,000 | |
| 2 | RealTime Location Engine Manage UI | $2,500 | ||
| 3 | Anchor Firmware | $7,500 | $12,000 | |
| 4 | Tag Firmware | $450 | ||
| 5 | Firmware encryption software | $150 | ||
| 6 | Anchor configuration program | $3,000 | ||
| 7 | Tag configuration program | $1,200 | ||
| 8 | Anchor factory initialization program | $4,000 | ||
| 9 | Tag factory initialization program | $2,000 | ||
| 10 | antenna delay calculation analysis program | Not sold separately | - | |
| 11 | UWB R&D Documents | Not sold separately | - | |
Notice:
1. Price unit is US Dollar. The package price refers to the total price after discounts when purchasing multiple items at the same time.
2. "Antenna Delay Calculation Analysis" is not sold separately, but is only used as a gift when purchasing a full set of desktop programs and firmware programs.
3. "R&D Documentation" is not sold separately and is only used as a gift when purchasing all programs.
Assuming that your team has mastered these technologies, you can be sure that paying someone to write code and draw circuit diagrams will definitely cost more than buying our code and circuit diagrams directly.
We will continue to disclose relevant technical details. If you don’t want to pay for it, that’s okay, your team can write their own code based on the technical details we publish.
After reading the information we provided, you may not be sure about the locating effect of this system before actual testing. You may wish to have some samples to test before making a purchase decision. When we stop this project in 2021, we have already cleared the inventory. If you need samples, I can help you make them. I'm responsible for ordering PCBs and SMTs from JLCPCB, soldering in the components they don't have, flashing the firmware and initializing it, providing all the software you need for testing, and providing remote support so you can conduct testing. You need to spend $800 to get 5 Anchors + 2 tags(I don't know your location. The delivery fee needs to be paid separately based on your location.). Please note that the purpose of the sample is only to test whether the system can work properly and the locating accuracy. The sample does not have a enclosure, only a fully functional PCBA (if the express delivery allows, I will add a lithium battery to the tag). There may be some components that I cannot buy in time, so some components may not be soldered, or substitutes may be used, but I guarantee that the samples can be accurately located and tested.
If you are interested in this project, you can contact us (email